Hantek 6022BE vs Micsig MHO14-200
Head-to-head spec comparison to help you pick the right scope for your bench.
Hantek
$65
Micsig
$888
Spec-by-Spec Comparison
| Spec | Hantek 6022BE | Micsig MHO14-200 |
|---|---|---|
| Bandwidth | 20 MHz | 200 MHz |
| Sample Rate | 0.048 GSa/s | 1 GSa/s |
| Channels | 2 | 4 |
| Memory Depth | 1 Mpts | 110 Mpts |
| Display Size | N/A | 8" |
| Weight | 0.2 kg | 1.5 kg |
| Price | $65 | $888 |
| Rating | 4.5/10 | 7.5/10 |
| Protocol Decoder | No | Yes |
| Function Gen | No | No |
| WiFi | No | Yes |
| Battery | No | Yes |
| Buy on Amazon · $65 | Buy on Amazon · $888 |
Pros & Cons
Hantek 6022BE
Pros
- Cheapest USB oscilloscope that actually works
- Tiny and portable — fits in a laptop bag or jacket pocket
- Works with open-source OpenHantek software (much better than official drivers)
- Bus-powered via USB — no wall adapter needed
- 1Mpt memory depth is genuinely decent for this price
Cons
- Only 20MHz bandwidth — severely limiting for most real work
- 48MSa/s sample rate means aliasing starts well below 20MHz
- Requires a PC to operate — useless in the field without a laptop
- Bundled software is mediocre; use OpenHantek instead
- No protocol decoding of any kind
Micsig MHO14-200
Pros
- 12-bit ADC with 200MHz bandwidth in a tablet form factor — nothing else combines these specs portably
- 16000mAh battery provides genuine all-day field use without power anxiety
- 8-inch anti-glare IPS display at 1280x800 — sharp and usable outdoors
- 110Mpt memory depth is exceptional for a portable instrument
- Built-in multimeter — one less tool to carry in the field
- Only 31mm thin and 1.5kg — genuinely tablet-sized portability
Cons
- At ~$888, this is significantly more expensive than benchtop alternatives with similar specs
- Micsig is a smaller brand — community support and documentation are limited compared to Rigol or Siglent
- 1GSa/s sample rate is modest for 200MHz bandwidth
- No function generator
- The portability premium is steep — a DHO924S at $449 outperforms it on a bench
Our Verdicts
Hantek 6022BE
The Hantek 6022BE is the bare minimum USB oscilloscope — and I mean that literally, not as a compliment. At ~$65, you get 2 channels and 20MHz of bandwidth piped through your laptop screen, which is enough to verify that a PWM signal exists or check audio frequencies. The 20MHz limit is genuinely painful: you can't reliably see rise times on 3.3V Arduino signals, and anything SPI-related at normal speeds is already at the edge of what this scope can resolve. Skip the official software and use OpenHantek instead — it's actively maintained and much better. If you can stretch to the Analog Discovery 3, the difference is night and day. If you're truly at a $65 ceiling and just need to verify signals exist, this will do — but you'll outgrow it fast.
Micsig MHO14-200
The Micsig MHO14-200 is the most impressive portable oscilloscope I've seen — a 12-bit, 200MHz, 4-channel scope with 110Mpt memory and an all-day battery in a package thinner than most tablets. For field work where you genuinely need oscilloscope capability away from a bench — automotive diagnostics, industrial maintenance, on-site embedded debugging — nothing else comes close to this combination of specs and portability. The 16000mAh battery and anti-glare display are clearly designed by people who've actually used scopes outdoors. At ~$888, you're paying a substantial portability premium. A Rigol DHO924S at $449 will outperform it on every spec except portability and battery life. This scope makes perfect sense for field engineers and automotive technicians. For bench-only hobbyists, it's hard to justify over the benchtop alternatives at half the price.