Hantek 6022BE vs OWON HDS2202S
Head-to-head spec comparison to help you pick the right scope for your bench.
Hantek
$65
OWON
$439
Spec-by-Spec Comparison
| Spec | Hantek 6022BE | OWON HDS2202S |
|---|---|---|
| Bandwidth | 20 MHz | 200 MHz |
| Sample Rate | 0.048 GSa/s | 1 GSa/s |
| Channels | 2 | 2 |
| Memory Depth | 1 Mpts | 8 Mpts |
| Display Size | N/A | 3.5" |
| Weight | 0.2 kg | 0.5 kg |
| Price | $65 | $439 |
| Rating | 4.5/10 | 7.0/10 |
| Protocol Decoder | No | Yes |
| Function Gen | No | Yes |
| WiFi | No | No |
| Battery | No | Yes |
| Buy on Amazon · $65 | Buy on Amazon · $439 |
Pros & Cons
Hantek 6022BE
Pros
- Cheapest USB oscilloscope that actually works
- Tiny and portable — fits in a laptop bag or jacket pocket
- Works with open-source OpenHantek software (much better than official drivers)
- Bus-powered via USB — no wall adapter needed
- 1Mpt memory depth is genuinely decent for this price
Cons
- Only 20MHz bandwidth — severely limiting for most real work
- 48MSa/s sample rate means aliasing starts well below 20MHz
- Requires a PC to operate — useless in the field without a laptop
- Bundled software is mediocre; use OpenHantek instead
- No protocol decoding of any kind
OWON HDS2202S
Pros
- 200MHz bandwidth in a handheld form factor — genuinely impressive
- Built-in multimeter and function generator in the same device
- Battery powered — actual field-ready portability
- Protocol decoding for SPI, I2C, and UART out of the box
- Deep memory for a handheld — exceptional for field capture work
Cons
- 3.5-inch screen is uncomfortably small for complex waveform analysis
- Only 2 channels — limits simultaneous signal debugging
- Button interface can feel clunky after using a touchscreen scope
- At ~$439, you're in benchtop scope territory — consider your priorities
- OWON's documentation is sparser than Rigol or Siglent
Our Verdicts
Hantek 6022BE
The Hantek 6022BE is the bare minimum USB oscilloscope — and I mean that literally, not as a compliment. At ~$65, you get 2 channels and 20MHz of bandwidth piped through your laptop screen, which is enough to verify that a PWM signal exists or check audio frequencies. The 20MHz limit is genuinely painful: you can't reliably see rise times on 3.3V Arduino signals, and anything SPI-related at normal speeds is already at the edge of what this scope can resolve. Skip the official software and use OpenHantek instead — it's actively maintained and much better. If you can stretch to the Analog Discovery 3, the difference is night and day. If you're truly at a $65 ceiling and just need to verify signals exist, this will do — but you'll outgrow it fast.
OWON HDS2202S
The OWON HDS2202S is an impressive piece of kit for field and portable work — 200MHz bandwidth, protocol decoding, a built-in multimeter and function generator, and battery power in a package that fits in a jacket pocket. At ~$439 though, you need to be honest with yourself about how you'll use it. That budget also buys you a Rigol DS1054Z with 4 channels and a 7-inch display for bench work. The HDS2202S makes sense if portability is a genuine requirement — automotive diagnostics, field service, under-the-hood debugging — rather than just bench work in a small space. For primary bench use at this price, a benchtop scope is the better tool.