Micsig MHO14-200 vs OWON HDS2202S
Head-to-head spec comparison to help you pick the right scope for your bench.
Spec-by-Spec Comparison
| Spec | Micsig MHO14-200 | OWON HDS2202S |
|---|---|---|
| Bandwidth | 200 MHz | 200 MHz |
| Sample Rate | 1 GSa/s | 1 GSa/s |
| Channels | 4 | 2 |
| Memory Depth | 110 Mpts | 8 Kpts |
| Display Size | 8" | 3.5" |
| Weight | 1.73 kg | 0.5 kg |
| Price | $769.99 | $309 |
| Rating | 7.5/10 | 7.0/10 |
| Protocol Decoder | Yes | No |
| Function Gen | No | Yes |
| WiFi | Yes | No |
| Battery | Yes | Yes |
| Buy on Amazon | Buy on Amazon |
Pros & Cons
Micsig MHO14-200
Pros
- 4 analog channels for simultaneous signal comparison
- 200 MHz nominal bandwidth; 110 Mpts acquisition memory
- Protocol decoding: SPI, I2C, UART, CAN
- Built-in battery and 8-inch touchscreen support portable use
Cons
- Channel count does not establish logic-analyzer capability; check digital-input options
- Specification-based assessment; no hands-on measurement record is documented
- 1.73 kg instrument weight requires more carrying capacity than a pocket USB scope
OWON HDS2202S
Pros
- Handheld oscilloscope, multimeter and generator functions in one instrument
- 200 MHz nominal bandwidth with two analog channels
- Battery operation suits mobile low-voltage diagnostics
Cons
- 8 Kpts acquisition memory limits longer captures
- Edge triggering only; no serial protocol decoding
- Published battery runtime is approximately 3–6 hours depending on use; no independent runtime test is documented
Our Verdicts
Micsig MHO14-200
The Micsig MHO14-200 combines four analog channels, 200 MHz nominal bandwidth and 110 Mpts listed memory in a portable instrument with a built-in battery and an 8-inch touchscreen. At 1.73 kg it offers a larger working display than a pocket instrument, with a corresponding carrying burden. Check the included protocol decoders and acquisition conditions for your channel configuration. Its built-in battery supports portable operation, but does not by itself establish isolated inputs or permission to connect to hazardous voltages. This is a documentation-based assessment without measured runtime or performance results.
OWON HDS2202S
The OWON HDS2202S suits portable low-voltage diagnostics when carrying an oscilloscope, multimeter and generator together matters more than deep capture memory. Its 200 MHz nominal bandwidth does not remove the limits of an 8 Kpts buffer, two analog channels and Edge-only triggering. For long serial captures or advanced triggering, compare a bench instrument and a separate logic analyzer. Published runtime is roughly 3–6 hours; this is a specification-based assessment, not a measured battery test.