Hantek DSO5072P vs Rigol DHO804
Head-to-head spec comparison to help you pick the right scope for your bench.
Hantek
$180
Rigol
$439
Spec-by-Spec Comparison
| Spec | Hantek DSO5072P | Rigol DHO804 |
|---|---|---|
| Bandwidth | 70 MHz | 70 MHz |
| Sample Rate | 1 GSa/s | 1.25 GSa/s |
| Channels | 2 | 4 |
| Memory Depth | 40 Kpts | 25 Mpts |
| Display Size | 7" | 7" |
| Weight | 2 kg | 3.8 kg |
| Price | $180 | $439 |
| Rating | 6.0/10 | 7.0/10 |
| Protocol Decoder | No | Yes |
| Function Gen | No | No |
| WiFi | No | Yes |
| Battery | No | No |
| Buy on Amazon · $180 | Buy on Amazon · $439 |
Pros & Cons
Hantek DSO5072P
Pros
- Traditional benchtop form factor — looks and feels like a real scope
- 70MHz bandwidth handles most hobbyist signals without complaint
- Reasonable price point for a desk instrument under $200
- Simple, button-based interface is easy to learn
Cons
- Only 2 channels limits simultaneous signal debugging
- 40Kpt memory depth is embarrassingly shallow by modern standards
- No protocol decoding — SPI and I2C debugging is impossible
- Fan can be noisy enough to notice in a quiet room
- No software update path to improve functionality
Rigol DHO804
Pros
- 7-inch IPS touchscreen — same display as the DHO924S
- 25Mpt memory depth is solid for extended capture sessions
- Modern, intuitive interface makes learning easy
- 4 channels with protocol decoding (SPI, I2C, UART)
- WiFi connectivity for remote viewing and data export
Cons
- 70MHz bandwidth is the real compromise — limits this scope's ceiling
- No built-in function generator unlike the DHO924S
- 25Mpts memory is half the DHO924S's 50Mpts
- At $439, the DHO924S adds 250MHz, a function gen, and double the memory for just $10 more
Our Verdicts
Hantek DSO5072P
The Hantek DSO5072P is a budget benchtop scope that does the basics well and little else. At ~$180, you get a proper desk instrument with 70MHz bandwidth and a 7-inch display — the kind of setup that looks like a real oscilloscope rather than a tablet toy. It handles Arduino debugging and basic analog work just fine. The problem is the 40Kpt memory depth, which is almost unusably shallow compared to modern budget alternatives. If you need to capture long waveforms or decode SPI/I2C, look at the Rigol DS1054Z instead. The DS1054Z costs about $170 more but gives you 300x the memory, 4 channels, and protocol decoding — it's a completely different class of instrument.
Rigol DHO804
The Rigol DHO804 is the entry point to Rigol's DHO platform, offering the same 7-inch IPS touchscreen experience as the DHO924S with 70MHz bandwidth and 25Mpt memory at $439. For Arduino, basic analog work, and learning, 70MHz is genuinely sufficient — most signals you'll encounter stay well under this limit. The honest challenge at this price is the DHO924S: it costs only $10 more but gives you 250MHz bandwidth, 50Mpt memory, and a built-in function generator. At a $10 price gap, it's very hard to recommend the DHO804 over its sibling. Unless you find a significantly better deal on the DHO804 specifically, the extra $10 for the DHO924S is obviously worth it.