FNIRSI 1014D vs Rigol DHO804
Head-to-head spec comparison to help you pick the right scope for your bench.
FNIRSI
$115
Rigol
$439
Spec-by-Spec Comparison
| Spec | FNIRSI 1014D | Rigol DHO804 |
|---|---|---|
| Bandwidth | 100 MHz | 70 MHz |
| Sample Rate | 1 GSa/s | 1.25 GSa/s |
| Channels | 2 | 4 |
| Memory Depth | 240 Kpts | 25 Mpts |
| Display Size | 7" | 7" |
| Weight | 0.68 kg | 3.8 kg |
| Price | $115 | $439 |
| Rating | 5.5/10 | 7.0/10 |
| Protocol Decoder | No | Yes |
| Function Gen | Yes | No |
| WiFi | No | Yes |
| Battery | Yes | No |
| Buy on Amazon · $115 | Buy on Amazon · $439 |
Pros & Cons
FNIRSI 1014D
Pros
- Affordable entry point at ~$115
- Built-in function generator is rare at this price
- Portable tablet form factor with battery backup
- Touchscreen interface is genuinely intuitive for beginners
- 100MHz bandwidth is impressive for an $80 scope
Cons
- 240Kpt memory depth is dangerously shallow — you'll hit this limit fast
- Build quality is plasticky; the corners flex under light pressure
- Calibration and accuracy lag well behind established brands
- No protocol decoding — can't decode SPI or I2C
- Firmware updates have been inconsistent
Rigol DHO804
Pros
- 7-inch IPS touchscreen — same display as the DHO924S
- 25Mpt memory depth is solid for extended capture sessions
- Modern, intuitive interface makes learning easy
- 4 channels with protocol decoding (SPI, I2C, UART)
- WiFi connectivity for remote viewing and data export
Cons
- 70MHz bandwidth is the real compromise — limits this scope's ceiling
- No built-in function generator unlike the DHO924S
- 25Mpts memory is half the DHO924S's 50Mpts
- At $439, the DHO924S adds 250MHz, a function gen, and double the memory for just $10 more
Our Verdicts
FNIRSI 1014D
The FNIRSI 1014D is one of the cheapest ways to get a real oscilloscope on your bench. At around $115, it's hard to complain about 100MHz bandwidth and a built-in signal generator — both of which would cost more from Hantek. The honest limitation is the 240Kpt memory depth, which is genuinely painful the moment you try to capture anything longer than a few milliseconds at full sample rate. I'd call this a learning tool, not a precision instrument. If you just want to see what your Arduino signals look like and learn what triggering means, it's a solid starting point. But if you need to trust your measurements or capture serial transactions, save up for a Rigol or Siglent — you'll thank yourself later.
Rigol DHO804
The Rigol DHO804 is the entry point to Rigol's DHO platform, offering the same 7-inch IPS touchscreen experience as the DHO924S with 70MHz bandwidth and 25Mpt memory at $439. For Arduino, basic analog work, and learning, 70MHz is genuinely sufficient — most signals you'll encounter stay well under this limit. The honest challenge at this price is the DHO924S: it costs only $10 more but gives you 250MHz bandwidth, 50Mpt memory, and a built-in function generator. At a $10 price gap, it's very hard to recommend the DHO804 over its sibling. Unless you find a significantly better deal on the DHO804 specifically, the extra $10 for the DHO924S is obviously worth it.