Hantek DSO5072P vs OWON HDS2202S
Head-to-head spec comparison to help you pick the right scope for your bench.
Hantek
$180
OWON
$439
Spec-by-Spec Comparison
| Spec | Hantek DSO5072P | OWON HDS2202S |
|---|---|---|
| Bandwidth | 70 MHz | 200 MHz |
| Sample Rate | 1 GSa/s | 1 GSa/s |
| Channels | 2 | 2 |
| Memory Depth | 40 Kpts | 8 Mpts |
| Display Size | 7" | 3.5" |
| Weight | 2 kg | 0.5 kg |
| Price | $180 | $439 |
| Rating | 6.0/10 | 7.0/10 |
| Protocol Decoder | No | Yes |
| Function Gen | No | Yes |
| WiFi | No | No |
| Battery | No | Yes |
| Buy on Amazon · $180 | Buy on Amazon · $439 |
Pros & Cons
Hantek DSO5072P
Pros
- Traditional benchtop form factor — looks and feels like a real scope
- 70MHz bandwidth handles most hobbyist signals without complaint
- Reasonable price point for a desk instrument under $200
- Simple, button-based interface is easy to learn
Cons
- Only 2 channels limits simultaneous signal debugging
- 40Kpt memory depth is embarrassingly shallow by modern standards
- No protocol decoding — SPI and I2C debugging is impossible
- Fan can be noisy enough to notice in a quiet room
- No software update path to improve functionality
OWON HDS2202S
Pros
- 200MHz bandwidth in a handheld form factor — genuinely impressive
- Built-in multimeter and function generator in the same device
- Battery powered — actual field-ready portability
- Protocol decoding for SPI, I2C, and UART out of the box
- Deep memory for a handheld — exceptional for field capture work
Cons
- 3.5-inch screen is uncomfortably small for complex waveform analysis
- Only 2 channels — limits simultaneous signal debugging
- Button interface can feel clunky after using a touchscreen scope
- At ~$439, you're in benchtop scope territory — consider your priorities
- OWON's documentation is sparser than Rigol or Siglent
Our Verdicts
Hantek DSO5072P
The Hantek DSO5072P is a budget benchtop scope that does the basics well and little else. At ~$180, you get a proper desk instrument with 70MHz bandwidth and a 7-inch display — the kind of setup that looks like a real oscilloscope rather than a tablet toy. It handles Arduino debugging and basic analog work just fine. The problem is the 40Kpt memory depth, which is almost unusably shallow compared to modern budget alternatives. If you need to capture long waveforms or decode SPI/I2C, look at the Rigol DS1054Z instead. The DS1054Z costs about $170 more but gives you 300x the memory, 4 channels, and protocol decoding — it's a completely different class of instrument.
OWON HDS2202S
The OWON HDS2202S is an impressive piece of kit for field and portable work — 200MHz bandwidth, protocol decoding, a built-in multimeter and function generator, and battery power in a package that fits in a jacket pocket. At ~$439 though, you need to be honest with yourself about how you'll use it. That budget also buys you a Rigol DS1054Z with 4 channels and a 7-inch display for bench work. The HDS2202S makes sense if portability is a genuine requirement — automotive diagnostics, field service, under-the-hood debugging — rather than just bench work in a small space. For primary bench use at this price, a benchtop scope is the better tool.