Hantek 6022BE vs OWON XDS3064AE
Head-to-head spec comparison to help you pick the right scope for your bench.
Hantek
$65
OWON
$799
Spec-by-Spec Comparison
| Spec | Hantek 6022BE | OWON XDS3064AE |
|---|---|---|
| Bandwidth | 20 MHz | 60 MHz |
| Sample Rate | 0.048 GSa/s | 1 GSa/s |
| Channels | 2 | 4 |
| Memory Depth | 1 Mpts | 40 Mpts |
| Display Size | N/A | 8" |
| Weight | 0.2 kg | 3.5 kg |
| Price | $65 | $799 |
| Rating | 4.5/10 | 6.5/10 |
| Protocol Decoder | No | Yes |
| Function Gen | No | No |
| WiFi | No | Yes |
| Battery | No | No |
| Buy on Amazon · $65 | Buy on Amazon · $799 |
Pros & Cons
Hantek 6022BE
Pros
- Cheapest USB oscilloscope that actually works
- Tiny and portable — fits in a laptop bag or jacket pocket
- Works with open-source OpenHantek software (much better than official drivers)
- Bus-powered via USB — no wall adapter needed
- 1Mpt memory depth is genuinely decent for this price
Cons
- Only 20MHz bandwidth — severely limiting for most real work
- 48MSa/s sample rate means aliasing starts well below 20MHz
- Requires a PC to operate — useless in the field without a laptop
- Bundled software is mediocre; use OpenHantek instead
- No protocol decoding of any kind
OWON XDS3064AE
Pros
- 40Mpt memory depth is exceptional for long serial transaction capture
- 14-bit ADC resolution — doubles the vertical resolution of standard 8-bit scopes
- 8-inch touchscreen display feels modern and responsive
- 4 channels with protocol decoding including CAN
- Built-in WiFi for remote viewing and data export
Cons
- 60MHz bandwidth is very limiting at the ~$800 price point
- At $799, the Siglent SDS1104X-U offers 100MHz and CAN/LIN for $380 less
- OWON software ecosystem is less mature than Rigol or Siglent
- Touchscreen can lag — not as responsive as Rigol's DHO series
- Smaller community means fewer tutorials and troubleshooting resources
Our Verdicts
Hantek 6022BE
The Hantek 6022BE is the bare minimum USB oscilloscope — and I mean that literally, not as a compliment. At ~$65, you get 2 channels and 20MHz of bandwidth piped through your laptop screen, which is enough to verify that a PWM signal exists or check audio frequencies. The 20MHz limit is genuinely painful: you can't reliably see rise times on 3.3V Arduino signals, and anything SPI-related at normal speeds is already at the edge of what this scope can resolve. Skip the official software and use OpenHantek instead — it's actively maintained and much better. If you can stretch to the Analog Discovery 3, the difference is night and day. If you're truly at a $65 ceiling and just need to verify signals exist, this will do — but you'll outgrow it fast.
OWON XDS3064AE
The OWON XDS3064AE is a niche instrument that earns its place for a specific buyer. At ~$800, the 14-bit ADC is its genuine differentiator — that extra vertical resolution matters for precision analog measurements and signal integrity work where standard 8-bit ADCs fall short. The 40Mpt memory depth is also excellent for capturing very long serial transactions. The problem is 60MHz bandwidth at $800 — that's genuinely hard to justify for most hobbyists. The Siglent SDS1104X-U at $419 gives you 100MHz, 4 channels, and CAN/LIN decoding for $380 less. The XDS3064AE only makes sense if you specifically need 14-bit resolution or very deep memory captures — for general-purpose work, better options exist at this price.