FNIRSI 1014D vs OWON XDS3064AE
Head-to-head spec comparison to help you pick the right scope for your bench.
FNIRSI
$115
OWON
$799
Spec-by-Spec Comparison
| Spec | FNIRSI 1014D | OWON XDS3064AE |
|---|---|---|
| Bandwidth | 100 MHz | 60 MHz |
| Sample Rate | 1 GSa/s | 1 GSa/s |
| Channels | 2 | 4 |
| Memory Depth | 240 Kpts | 40 Mpts |
| Display Size | 7" | 8" |
| Weight | 0.68 kg | 3.5 kg |
| Price | $115 | $799 |
| Rating | 5.5/10 | 6.5/10 |
| Protocol Decoder | No | Yes |
| Function Gen | Yes | No |
| WiFi | No | Yes |
| Battery | Yes | No |
| Buy on Amazon · $115 | Buy on Amazon · $799 |
Pros & Cons
FNIRSI 1014D
Pros
- Affordable entry point at ~$115
- Built-in function generator is rare at this price
- Portable tablet form factor with battery backup
- Touchscreen interface is genuinely intuitive for beginners
- 100MHz bandwidth is impressive for an $80 scope
Cons
- 240Kpt memory depth is dangerously shallow — you'll hit this limit fast
- Build quality is plasticky; the corners flex under light pressure
- Calibration and accuracy lag well behind established brands
- No protocol decoding — can't decode SPI or I2C
- Firmware updates have been inconsistent
OWON XDS3064AE
Pros
- 40Mpt memory depth is exceptional for long serial transaction capture
- 14-bit ADC resolution — doubles the vertical resolution of standard 8-bit scopes
- 8-inch touchscreen display feels modern and responsive
- 4 channels with protocol decoding including CAN
- Built-in WiFi for remote viewing and data export
Cons
- 60MHz bandwidth is very limiting at the ~$800 price point
- At $799, the Siglent SDS1104X-U offers 100MHz and CAN/LIN for $380 less
- OWON software ecosystem is less mature than Rigol or Siglent
- Touchscreen can lag — not as responsive as Rigol's DHO series
- Smaller community means fewer tutorials and troubleshooting resources
Our Verdicts
FNIRSI 1014D
The FNIRSI 1014D is one of the cheapest ways to get a real oscilloscope on your bench. At around $115, it's hard to complain about 100MHz bandwidth and a built-in signal generator — both of which would cost more from Hantek. The honest limitation is the 240Kpt memory depth, which is genuinely painful the moment you try to capture anything longer than a few milliseconds at full sample rate. I'd call this a learning tool, not a precision instrument. If you just want to see what your Arduino signals look like and learn what triggering means, it's a solid starting point. But if you need to trust your measurements or capture serial transactions, save up for a Rigol or Siglent — you'll thank yourself later.
OWON XDS3064AE
The OWON XDS3064AE is a niche instrument that earns its place for a specific buyer. At ~$800, the 14-bit ADC is its genuine differentiator — that extra vertical resolution matters for precision analog measurements and signal integrity work where standard 8-bit ADCs fall short. The 40Mpt memory depth is also excellent for capturing very long serial transactions. The problem is 60MHz bandwidth at $800 — that's genuinely hard to justify for most hobbyists. The Siglent SDS1104X-U at $419 gives you 100MHz, 4 channels, and CAN/LIN decoding for $380 less. The XDS3064AE only makes sense if you specifically need 14-bit resolution or very deep memory captures — for general-purpose work, better options exist at this price.