FNIRSI 1014D vs Siglent SDS1104X-U
Head-to-head spec comparison to help you pick the right scope for your bench.
FNIRSI
$115
Siglent
$419
Spec-by-Spec Comparison
| Spec | FNIRSI 1014D | Siglent SDS1104X-U |
|---|---|---|
| Bandwidth | 100 MHz | 100 MHz |
| Sample Rate | 1 GSa/s | 1 GSa/s |
| Channels | 2 | 4 |
| Memory Depth | 240 Kpts | 14 Mpts |
| Display Size | 7" | 7" |
| Weight | 0.68 kg | 3.1 kg |
| Price | $115 | $419 |
| Rating | 5.5/10 | 7.5/10 |
| Protocol Decoder | No | Yes |
| Function Gen | Yes | No |
| WiFi | No | No |
| Battery | Yes | No |
| Buy on Amazon · $115 | Buy on Amazon · $419 |
Pros & Cons
FNIRSI 1014D
Pros
- Affordable entry point at ~$115
- Built-in function generator is rare at this price
- Portable tablet form factor with battery backup
- Touchscreen interface is genuinely intuitive for beginners
- 100MHz bandwidth is impressive for an $80 scope
Cons
- 240Kpt memory depth is dangerously shallow — you'll hit this limit fast
- Build quality is plasticky; the corners flex under light pressure
- Calibration and accuracy lag well behind established brands
- No protocol decoding — can't decode SPI or I2C
- Firmware updates have been inconsistent
Siglent SDS1104X-U
Pros
- 4 channels with 100MHz bandwidth — best of both in Siglent's lineup
- CAN and LIN decoding included — no license fees unlike Rigol
- 14Mpt memory depth for long capture sessions
- Better probe compensation and input specs than older Siglent models
- Siglent's firmware has matured significantly with recent updates
Cons
- ~$419 for a 100MHz, non-touchscreen scope is a stiff ask
- No touchscreen — button navigation only
- 1GSa/s sample rate is adequate but not exceptional
- Rigol DHO924S offers 250MHz and a touchscreen for $30 more
Our Verdicts
FNIRSI 1014D
The FNIRSI 1014D is one of the cheapest ways to get a real oscilloscope on your bench. At around $115, it's hard to complain about 100MHz bandwidth and a built-in signal generator — both of which would cost more from Hantek. The honest limitation is the 240Kpt memory depth, which is genuinely painful the moment you try to capture anything longer than a few milliseconds at full sample rate. I'd call this a learning tool, not a precision instrument. If you just want to see what your Arduino signals look like and learn what triggering means, it's a solid starting point. But if you need to trust your measurements or capture serial transactions, save up for a Rigol or Siglent — you'll thank yourself later.
Siglent SDS1104X-U
The Siglent SDS1104X-U is Siglent's answer to the 4-channel mid-range market, and its CAN/LIN decoding is its killer differentiator. Rigol charges extra for CAN decoding on most models; Siglent includes it free. If you're doing automotive embedded work — car CAN bus debugging, LIN network analysis, anything that touches vehicle electronics — the SDS1104X-U at $419 is the most cost-effective path to proper protocol support. For general hobbyist use without automotive protocol requirements, the DS1054Z at $349 remains better value, and the Rigol DHO924S at $449 offers 250MHz bandwidth and a touchscreen for just $30 more. I'd buy the SDS1104X-U specifically if CAN/LIN decoding is non-negotiable.