Rigol DHO802 vs Siglent SDS1202X-E
Head-to-head spec comparison to help you pick the right scope for your bench.
Rigol
$329
Siglent
$379
Spec-by-Spec Comparison
| Spec | Rigol DHO802 | Siglent SDS1202X-E |
|---|---|---|
| Bandwidth | 70 MHz | 200 MHz |
| Sample Rate | 1.25 GSa/s | 1 GSa/s |
| Channels | 2 | 2 |
| Memory Depth | 25 Mpts | 14 Mpts |
| Display Size | 7" | 7" |
| Weight | 1.78 kg | 3.3 kg |
| Price | $329 | $379 |
| Rating | 7.5/10 | 7.5/10 |
| Protocol Decoder | Yes | Yes |
| Function Gen | No | No |
| WiFi | Yes | No |
| Battery | No | No |
| Buy on Amazon · $329 | Buy on Amazon · $379 |
Pros & Cons
Rigol DHO802
Pros
- 12-bit ADC at $329 — the cheapest way to get modern 12-bit resolution from a major brand
- Same compact form factor and touchscreen as the rest of the DHO800 series
- 25Mpt memory depth is excellent for a scope at this price
- USB-C power means you can run it from a portable battery pack
- Protocol decoding for SPI, I2C, UART, and CAN included
- Modern Rigol UI — the same intuitive touchscreen experience as the DHO924S
Cons
- Only 2 channels — the biggest limitation for embedded debugging
- 70MHz bandwidth is adequate but not exciting
- Fan noise carries over from the DHO800 series
- For ~$120 more, the DHO804 adds 2 more channels which matters enormously
- No function generator
Siglent SDS1202X-E
Pros
- 200MHz bandwidth — 4x the stock DS1054Z at nearly the same price
- 14Mpt memory depth is excellent for capturing long waveforms
- Protocol decoding includes CAN and LIN — Rigol charges extra for these
- SPL (Siglent Programming Language) for scripting and automation
- Serial decode is free, not locked behind a paid license
Cons
- Only 2 channels — the fundamental tradeoff versus the DS1054Z
- Interface is less intuitive than Rigol's — steeper learning curve
- Smaller community means fewer tutorials and answered questions online
- No touchscreen — button-heavy navigation
- No function generator
Our Verdicts
Rigol DHO802
The Rigol DHO802 is the budget entry point to 12-bit oscilloscope territory, and at $329 it's genuinely compelling. You get the same modern touchscreen interface, 12-bit ADC, and compact form factor as the rest of the DHO800 series, just with 2 channels instead of 4. The 25Mpt memory and protocol decoding are both strong at this price. The honest question is whether 2 channels are enough for your work — if you're probing a single signal or doing basic Arduino debugging, absolutely. The moment you need to correlate clock and data lines on SPI, or monitor multiple signals simultaneously, you'll wish you had 4 channels. The DHO804 at ~$439 adds those extra channels, and for most users that $110 premium is worth paying upfront rather than regretting later.
Siglent SDS1202X-E
The Siglent SDS1202X-E is the DS1054Z's biggest competitor, and it wins on raw specs: 200MHz bandwidth, 14Mpt memory, and protocol decoding that includes CAN and LIN without paying for licenses. The catch is you only get 2 channels, and that trade-off matters more than it sounds. When you're debugging SPI with clock, data, and chip-select lines all running, or trying to correlate an analog signal with a digital trigger, you'll wish you had 4 channels. If you work primarily with audio circuits, RF signals, or single-channel measurements, the 200MHz bandwidth is genuinely useful and this scope makes complete sense. For general embedded debugging with multiple signals, I'd take the DS1054Z's 4 channels over the extra bandwidth.