Hantek DSO5072P vs Rigol DHO802
Head-to-head spec comparison to help you pick the right scope for your bench.
Hantek
$180
Rigol
$329
Spec-by-Spec Comparison
| Spec | Hantek DSO5072P | Rigol DHO802 |
|---|---|---|
| Bandwidth | 70 MHz | 70 MHz |
| Sample Rate | 1 GSa/s | 1.25 GSa/s |
| Channels | 2 | 2 |
| Memory Depth | 40 Kpts | 25 Mpts |
| Display Size | 7" | 7" |
| Weight | 2 kg | 1.78 kg |
| Price | $180 | $329 |
| Rating | 6.0/10 | 7.5/10 |
| Protocol Decoder | No | Yes |
| Function Gen | No | No |
| WiFi | No | Yes |
| Battery | No | No |
| Buy on Amazon · $180 | Buy on Amazon · $329 |
Pros & Cons
Hantek DSO5072P
Pros
- Traditional benchtop form factor — looks and feels like a real scope
- 70MHz bandwidth handles most hobbyist signals without complaint
- Reasonable price point for a desk instrument under $200
- Simple, button-based interface is easy to learn
Cons
- Only 2 channels limits simultaneous signal debugging
- 40Kpt memory depth is embarrassingly shallow by modern standards
- No protocol decoding — SPI and I2C debugging is impossible
- Fan can be noisy enough to notice in a quiet room
- No software update path to improve functionality
Rigol DHO802
Pros
- 12-bit ADC at $329 — the cheapest way to get modern 12-bit resolution from a major brand
- Same compact form factor and touchscreen as the rest of the DHO800 series
- 25Mpt memory depth is excellent for a scope at this price
- USB-C power means you can run it from a portable battery pack
- Protocol decoding for SPI, I2C, UART, and CAN included
- Modern Rigol UI — the same intuitive touchscreen experience as the DHO924S
Cons
- Only 2 channels — the biggest limitation for embedded debugging
- 70MHz bandwidth is adequate but not exciting
- Fan noise carries over from the DHO800 series
- For ~$120 more, the DHO804 adds 2 more channels which matters enormously
- No function generator
Our Verdicts
Hantek DSO5072P
The Hantek DSO5072P is a budget benchtop scope that does the basics well and little else. At ~$180, you get a proper desk instrument with 70MHz bandwidth and a 7-inch display — the kind of setup that looks like a real oscilloscope rather than a tablet toy. It handles Arduino debugging and basic analog work just fine. The problem is the 40Kpt memory depth, which is almost unusably shallow compared to modern budget alternatives. If you need to capture long waveforms or decode SPI/I2C, look at the Rigol DS1054Z instead. The DS1054Z costs about $170 more but gives you 300x the memory, 4 channels, and protocol decoding — it's a completely different class of instrument.
Rigol DHO802
The Rigol DHO802 is the budget entry point to 12-bit oscilloscope territory, and at $329 it's genuinely compelling. You get the same modern touchscreen interface, 12-bit ADC, and compact form factor as the rest of the DHO800 series, just with 2 channels instead of 4. The 25Mpt memory and protocol decoding are both strong at this price. The honest question is whether 2 channels are enough for your work — if you're probing a single signal or doing basic Arduino debugging, absolutely. The moment you need to correlate clock and data lines on SPI, or monitor multiple signals simultaneously, you'll wish you had 4 channels. The DHO804 at ~$439 adds those extra channels, and for most users that $110 premium is worth paying upfront rather than regretting later.