FNIRSI 1014D vs Siglent SDS804X HD
Head-to-head spec comparison to help you pick the right scope for your bench.
FNIRSI
$115
Siglent
$438
Spec-by-Spec Comparison
| Spec | FNIRSI 1014D | Siglent SDS804X HD |
|---|---|---|
| Bandwidth | 100 MHz | 70 MHz |
| Sample Rate | 1 GSa/s | 2 GSa/s |
| Channels | 2 | 4 |
| Memory Depth | 240 Kpts | 50 Mpts |
| Display Size | 7" | 7" |
| Weight | 0.68 kg | 2.6 kg |
| Price | $115 | $438 |
| Rating | 5.5/10 | 8.0/10 |
| Protocol Decoder | No | Yes |
| Function Gen | Yes | No |
| WiFi | No | Yes |
| Battery | Yes | No |
| Buy on Amazon · $115 | Buy on Amazon · $438 |
Pros & Cons
FNIRSI 1014D
Pros
- Affordable entry point at ~$115
- Built-in function generator is rare at this price
- Portable tablet form factor with battery backup
- Touchscreen interface is genuinely intuitive for beginners
- 100MHz bandwidth is impressive for an $80 scope
Cons
- 240Kpt memory depth is dangerously shallow — you'll hit this limit fast
- Build quality is plasticky; the corners flex under light pressure
- Calibration and accuracy lag well behind established brands
- No protocol decoding — can't decode SPI or I2C
- Firmware updates have been inconsistent
Siglent SDS804X HD
Pros
- 12-bit ADC with what Reddit considers a cleaner analog front-end than Rigol — LeCroy heritage shows
- 2GSa/s sample rate is genuinely faster than the DHO804's 1.25GSa/s
- 50Mpt memory depth matches the DHO924S and doubles the DHO804
- CAN and LIN decoding included free — Siglent's standard generosity on protocols
- 70MHz bandwidth is unlockable to 200MHz via software license — massive upgrade path
- 7-inch capacitive touchscreen with responsive multi-touch gestures
Cons
- 70MHz stock bandwidth is limiting — you're paying for the upgrade path, not the base spec
- No built-in function generator (optional add-on)
- Siglent's community is smaller than Rigol's — fewer tutorials and forum answers
- At ~$438, you're close to the DHO924S at $449 which has 250MHz stock bandwidth
Our Verdicts
FNIRSI 1014D
The FNIRSI 1014D is one of the cheapest ways to get a real oscilloscope on your bench. At around $115, it's hard to complain about 100MHz bandwidth and a built-in signal generator — both of which would cost more from Hantek. The honest limitation is the 240Kpt memory depth, which is genuinely painful the moment you try to capture anything longer than a few milliseconds at full sample rate. I'd call this a learning tool, not a precision instrument. If you just want to see what your Arduino signals look like and learn what triggering means, it's a solid starting point. But if you need to trust your measurements or capture serial transactions, save up for a Rigol or Siglent — you'll thank yourself later.
Siglent SDS804X HD
The Siglent SDS804X HD is THE competitor to the Rigol DHO804 that Reddit can't stop debating. On paper, 70MHz for $438 looks underwhelming — but the real story is Siglent's 12-bit ADC implementation, which the community consistently praises as having a cleaner noise floor than Rigol's, thanks to Siglent's LeCroy heritage in analog front-end design. The 2GSa/s sample rate and 50Mpt memory depth are both better than the DHO804. The bandwidth unlock to 200MHz via software license is the ace up its sleeve — it turns a $438 scope into a legitimate 200MHz instrument for an additional fee. If you value measurement quality over raw bandwidth numbers, this is the 12-bit scope to buy. If you just want the most bandwidth per dollar, the DHO924S at $449 with 250MHz is hard to argue against.