FNIRSI DPOX180H vs Siglent SDS1202X-E
Head-to-head spec comparison to help you pick the right scope for your bench.
FNIRSI
$110
Siglent
$379
Spec-by-Spec Comparison
| Spec | FNIRSI DPOX180H | Siglent SDS1202X-E |
|---|---|---|
| Bandwidth | 180 MHz | 200 MHz |
| Sample Rate | 0.5 GSa/s | 1 GSa/s |
| Channels | 2 | 2 |
| Memory Depth | 28 Kpts | 14 Mpts |
| Display Size | 2.8" | 7" |
| Weight | 0.285 kg | 3.3 kg |
| Price | $110 | $379 |
| Rating | 5.0/10 | 7.5/10 |
| Protocol Decoder | Yes | Yes |
| Function Gen | Yes | No |
| WiFi | No | No |
| Battery | Yes | No |
| Buy on Amazon · $110 | Buy on Amazon · $379 |
Pros & Cons
FNIRSI DPOX180H
Pros
- Very affordable at ~$110 for what it packs
- 180MHz bandwidth in a genuinely pocket-sized device
- Battery powered and truly portable — shirt-pocket size
- Built-in function generator and multimeter
- Protocol decoding for UART, SPI, and I2C
Cons
- 28Kpt memory depth is critically shallow — limits capture usefulness significantly
- 2.8-inch screen is very small — detailed waveform analysis is uncomfortable
- 500MSa/s sample rate is modest even for a pocket scope
- Accuracy concerns typical of FNIRSI at this price tier
- Build quality is mediocre — the housing feels flimsy
Siglent SDS1202X-E
Pros
- 200MHz bandwidth — 4x the stock DS1054Z at nearly the same price
- 14Mpt memory depth is excellent for capturing long waveforms
- Protocol decoding includes CAN and LIN — Rigol charges extra for these
- SPL (Siglent Programming Language) for scripting and automation
- Serial decode is free, not locked behind a paid license
Cons
- Only 2 channels — the fundamental tradeoff versus the DS1054Z
- Interface is less intuitive than Rigol's — steeper learning curve
- Smaller community means fewer tutorials and answered questions online
- No touchscreen — button-heavy navigation
- No function generator
Our Verdicts
FNIRSI DPOX180H
The FNIRSI DPOX180H is a pocket oscilloscope with surprisingly high bandwidth for the money — 180MHz in something smaller than a deck of cards is legitimately impressive. At $110, you also get protocol decoding, a function generator, and a multimeter in the same device. The hard truth is the 28Kpt memory depth and 2.8-inch screen kill its usefulness for anything beyond quick spot checks — you can glance at a signal, but capturing and analyzing a long serial transaction is off the table. The OWON HDS2202S is better in almost every meaningful way if portability is your goal, but it costs $439 versus this scope's $110. At this price, the DPOX180H is best understood as a capable probe-and-check tool, not a primary bench instrument.
Siglent SDS1202X-E
The Siglent SDS1202X-E is the DS1054Z's biggest competitor, and it wins on raw specs: 200MHz bandwidth, 14Mpt memory, and protocol decoding that includes CAN and LIN without paying for licenses. The catch is you only get 2 channels, and that trade-off matters more than it sounds. When you're debugging SPI with clock, data, and chip-select lines all running, or trying to correlate an analog signal with a digital trigger, you'll wish you had 4 channels. If you work primarily with audio circuits, RF signals, or single-channel measurements, the 200MHz bandwidth is genuinely useful and this scope makes complete sense. For general embedded debugging with multiple signals, I'd take the DS1054Z's 4 channels over the extra bandwidth.