FNIRSI DPOX180H vs Hantek DSO5072P
Head-to-head spec comparison to help you pick the right scope for your bench.
FNIRSI
$110
Hantek
$180
Spec-by-Spec Comparison
| Spec | FNIRSI DPOX180H | Hantek DSO5072P |
|---|---|---|
| Bandwidth | 180 MHz | 70 MHz |
| Sample Rate | 0.5 GSa/s | 1 GSa/s |
| Channels | 2 | 2 |
| Memory Depth | 28 Kpts | 40 Kpts |
| Display Size | 2.8" | 7" |
| Weight | 0.285 kg | 2 kg |
| Price | $110 | $180 |
| Rating | 5.0/10 | 6.0/10 |
| Protocol Decoder | Yes | No |
| Function Gen | Yes | No |
| WiFi | No | No |
| Battery | Yes | No |
| Buy on Amazon · $110 | Buy on Amazon · $180 |
Pros & Cons
FNIRSI DPOX180H
Pros
- Very affordable at ~$110 for what it packs
- 180MHz bandwidth in a genuinely pocket-sized device
- Battery powered and truly portable — shirt-pocket size
- Built-in function generator and multimeter
- Protocol decoding for UART, SPI, and I2C
Cons
- 28Kpt memory depth is critically shallow — limits capture usefulness significantly
- 2.8-inch screen is very small — detailed waveform analysis is uncomfortable
- 500MSa/s sample rate is modest even for a pocket scope
- Accuracy concerns typical of FNIRSI at this price tier
- Build quality is mediocre — the housing feels flimsy
Hantek DSO5072P
Pros
- Traditional benchtop form factor — looks and feels like a real scope
- 70MHz bandwidth handles most hobbyist signals without complaint
- Reasonable price point for a desk instrument under $200
- Simple, button-based interface is easy to learn
Cons
- Only 2 channels limits simultaneous signal debugging
- 40Kpt memory depth is embarrassingly shallow by modern standards
- No protocol decoding — SPI and I2C debugging is impossible
- Fan can be noisy enough to notice in a quiet room
- No software update path to improve functionality
Our Verdicts
FNIRSI DPOX180H
The FNIRSI DPOX180H is a pocket oscilloscope with surprisingly high bandwidth for the money — 180MHz in something smaller than a deck of cards is legitimately impressive. At $110, you also get protocol decoding, a function generator, and a multimeter in the same device. The hard truth is the 28Kpt memory depth and 2.8-inch screen kill its usefulness for anything beyond quick spot checks — you can glance at a signal, but capturing and analyzing a long serial transaction is off the table. The OWON HDS2202S is better in almost every meaningful way if portability is your goal, but it costs $439 versus this scope's $110. At this price, the DPOX180H is best understood as a capable probe-and-check tool, not a primary bench instrument.
Hantek DSO5072P
The Hantek DSO5072P is a budget benchtop scope that does the basics well and little else. At ~$180, you get a proper desk instrument with 70MHz bandwidth and a 7-inch display — the kind of setup that looks like a real oscilloscope rather than a tablet toy. It handles Arduino debugging and basic analog work just fine. The problem is the 40Kpt memory depth, which is almost unusably shallow compared to modern budget alternatives. If you need to capture long waveforms or decode SPI/I2C, look at the Rigol DS1054Z instead. The DS1054Z costs about $170 more but gives you 300x the memory, 4 channels, and protocol decoding — it's a completely different class of instrument.