FNIRSI DPOX180H vs Micsig MHO14-200
Head-to-head spec comparison to help you pick the right scope for your bench.
FNIRSI
$110
Micsig
$888
Spec-by-Spec Comparison
| Spec | FNIRSI DPOX180H | Micsig MHO14-200 |
|---|---|---|
| Bandwidth | 180 MHz | 200 MHz |
| Sample Rate | 0.5 GSa/s | 1 GSa/s |
| Channels | 2 | 4 |
| Memory Depth | 28 Kpts | 110 Mpts |
| Display Size | 2.8" | 8" |
| Weight | 0.285 kg | 1.5 kg |
| Price | $110 | $888 |
| Rating | 5.0/10 | 7.5/10 |
| Protocol Decoder | Yes | Yes |
| Function Gen | Yes | No |
| WiFi | No | Yes |
| Battery | Yes | Yes |
| Buy on Amazon · $110 | Buy on Amazon · $888 |
Pros & Cons
FNIRSI DPOX180H
Pros
- Very affordable at ~$110 for what it packs
- 180MHz bandwidth in a genuinely pocket-sized device
- Battery powered and truly portable — shirt-pocket size
- Built-in function generator and multimeter
- Protocol decoding for UART, SPI, and I2C
Cons
- 28Kpt memory depth is critically shallow — limits capture usefulness significantly
- 2.8-inch screen is very small — detailed waveform analysis is uncomfortable
- 500MSa/s sample rate is modest even for a pocket scope
- Accuracy concerns typical of FNIRSI at this price tier
- Build quality is mediocre — the housing feels flimsy
Micsig MHO14-200
Pros
- 12-bit ADC with 200MHz bandwidth in a tablet form factor — nothing else combines these specs portably
- 16000mAh battery provides genuine all-day field use without power anxiety
- 8-inch anti-glare IPS display at 1280x800 — sharp and usable outdoors
- 110Mpt memory depth is exceptional for a portable instrument
- Built-in multimeter — one less tool to carry in the field
- Only 31mm thin and 1.5kg — genuinely tablet-sized portability
Cons
- At ~$888, this is significantly more expensive than benchtop alternatives with similar specs
- Micsig is a smaller brand — community support and documentation are limited compared to Rigol or Siglent
- 1GSa/s sample rate is modest for 200MHz bandwidth
- No function generator
- The portability premium is steep — a DHO924S at $449 outperforms it on a bench
Our Verdicts
FNIRSI DPOX180H
The FNIRSI DPOX180H is a pocket oscilloscope with surprisingly high bandwidth for the money — 180MHz in something smaller than a deck of cards is legitimately impressive. At $110, you also get protocol decoding, a function generator, and a multimeter in the same device. The hard truth is the 28Kpt memory depth and 2.8-inch screen kill its usefulness for anything beyond quick spot checks — you can glance at a signal, but capturing and analyzing a long serial transaction is off the table. The OWON HDS2202S is better in almost every meaningful way if portability is your goal, but it costs $439 versus this scope's $110. At this price, the DPOX180H is best understood as a capable probe-and-check tool, not a primary bench instrument.
Micsig MHO14-200
The Micsig MHO14-200 is the most impressive portable oscilloscope I've seen — a 12-bit, 200MHz, 4-channel scope with 110Mpt memory and an all-day battery in a package thinner than most tablets. For field work where you genuinely need oscilloscope capability away from a bench — automotive diagnostics, industrial maintenance, on-site embedded debugging — nothing else comes close to this combination of specs and portability. The 16000mAh battery and anti-glare display are clearly designed by people who've actually used scopes outdoors. At ~$888, you're paying a substantial portability premium. A Rigol DHO924S at $449 will outperform it on every spec except portability and battery life. This scope makes perfect sense for field engineers and automotive technicians. For bench-only hobbyists, it's hard to justify over the benchtop alternatives at half the price.