PicoScope 2204A vs Rigol DHO802
Head-to-head spec comparison to help you pick the right scope for your bench.
Pico Technology
$185
Rigol
$329
Spec-by-Spec Comparison
| Spec | PicoScope 2204A | Rigol DHO802 |
|---|---|---|
| Bandwidth | 10 MHz | 70 MHz |
| Sample Rate | 0.1 GSa/s | 1.25 GSa/s |
| Channels | 2 | 2 |
| Memory Depth | 8 Kpts | 25 Mpts |
| Display Size | N/A | 7" |
| Weight | 0.15 kg | 1.78 kg |
| Price | $185 | $329 |
| Rating | 6.5/10 | 7.5/10 |
| Protocol Decoder | Yes | Yes |
| Function Gen | Yes | No |
| WiFi | No | Yes |
| Battery | No | No |
| Buy on Amazon · $185 | Buy on Amazon · $329 |
Pros & Cons
PicoScope 2204A
Pros
- PicoScope 7 software is genuinely excellent — Reddit consistently ranks it above any standalone scope UI
- 16 protocol decoders included free — SPI, I2C, UART, CAN, LIN, FlexRay, I2S, and more
- Built-in AWG function generator in a $185 package
- Ultra-compact and USB-powered — fits in any laptop bag
- Free lifetime software updates — Pico Technology has an outstanding track record of continued improvement
- Up to 12-bit enhanced resolution mode for precision measurements
Cons
- 10MHz bandwidth is severely limiting — fine for audio and slow digital, useless for fast SPI or RF
- 8Kpt buffer memory is tiny — long captures require streaming mode
- Requires a PC to operate — completely useless without a laptop or desktop
- 100MSa/s sample rate means you're already at Nyquist limits with 10MHz signals
- Only 2 channels of analog input
Rigol DHO802
Pros
- 12-bit ADC at $329 — the cheapest way to get modern 12-bit resolution from a major brand
- Same compact form factor and touchscreen as the rest of the DHO800 series
- 25Mpt memory depth is excellent for a scope at this price
- USB-C power means you can run it from a portable battery pack
- Protocol decoding for SPI, I2C, UART, and CAN included
- Modern Rigol UI — the same intuitive touchscreen experience as the DHO924S
Cons
- Only 2 channels — the biggest limitation for embedded debugging
- 70MHz bandwidth is adequate but not exciting
- Fan noise carries over from the DHO800 series
- For ~$120 more, the DHO804 adds 2 more channels which matters enormously
- No function generator
Our Verdicts
PicoScope 2204A
The PicoScope 2204A is the USB scope that Reddit actually respects — unlike the Hantek 6022BE, Pico Technology backs this with genuinely excellent software that gets free updates for life. PicoScope 7 is arguably the best oscilloscope software on any platform, with 16 protocol decoders, advanced math, and a modern interface that makes standalone scope UIs feel dated. The catch is obvious: 10MHz bandwidth and 8Kpt memory mean this is a low-frequency instrument. Audio work, slow serial protocols, power supply debugging, and basic Arduino verification are all fine. Anything above a few MHz — fast SPI, I2C at 400kHz+, or RF work — is off the table. If you already have a laptop and need a scope for bench work under 10MHz, the software quality alone makes this worth the $185. If you need a scope that works without a computer or handles faster signals, look at the DHO802 instead.
Rigol DHO802
The Rigol DHO802 is the budget entry point to 12-bit oscilloscope territory, and at $329 it's genuinely compelling. You get the same modern touchscreen interface, 12-bit ADC, and compact form factor as the rest of the DHO800 series, just with 2 channels instead of 4. The 25Mpt memory and protocol decoding are both strong at this price. The honest question is whether 2 channels are enough for your work — if you're probing a single signal or doing basic Arduino debugging, absolutely. The moment you need to correlate clock and data lines on SPI, or monitor multiple signals simultaneously, you'll wish you had 4 channels. The DHO804 at ~$439 adds those extra channels, and for most users that $110 premium is worth paying upfront rather than regretting later.